Create a Plane Fighting Game in Corona: Finishing Gameplay

Share the joy

•  
•  
•  
•  
•  
•  
•  
•  
•  
•  
•  

What You’ll Be Creating

Introduction

In the fourth and final part of this series, we continue where we left of in the previous tutorial. We’ll create enemy planes the player needs to avoid or shoot, and we’ll also create a game over screen.

1. generateEnemys

The generateEnemys function generates a number between three and seven, and calls the generateEnemyPlane function every two seconds for however many times numberOfEnemysToGenerate is equal to. Enter the following code snippet to gamelevel.lua.

function generateEnemys() numberOfEnemysToGenerate = math.random(3,7) timer.performWithDelay( 2000, generateEnemyPlane,numberOfEnemysToGenerate)
end

We also need to invoke this function in the enterScene method as shown below.

function scene:enterScene( event ) --SNIP-- Runtime:addEventListener("enterFrame", gameLoop) startTimers() generateEnemys()
end

Let’s see what the implementation of generateEnemyPlane looks like.

2. generateEnemyPlane

The generateEnemyPlane function generates one enemy plane. There are three types of enemy planes in this game.

• Regular , moves down the screen in a straight line


• Waver, moves in a wave pattern on the x axis


• Chaser, chases the player’s plane

function generateEnemyPlane() if(gameOver ~= true) then local randomGridSpace = math.random(11) local randomEnemyNumber = math.random(3) local tempEnemy if(planeGrid[randomGridSpace]~=0) then generateEnemyPlane() return else if(randomEnemyNumber == 1)then tempEnemy = display.newImage("enemy1.png", (randomGridSpace*65)-28,-60) tempEnemy.type = "regular" elseif(randomEnemyNumber == 2) then tempEnemy = display.newImage("enemy2.png", display.contentWidth/2 -playerWidth/2,-60) tempEnemy.type = "waver" else tempEnemy = display.newImage("enemy3.png", (randomGridSpace*65)-28,-60) tempEnemy.type = "chaser" end planeGrid[randomGridSpace] = 1 table.insert(enemyPlanes,tempEnemy) planeGroup:insert(tempEnemy) numberOfEnemysGenerated = numberOfEnemysGenerated+1; end if(numberOfEnemysGenerated == numberOfEnemysToGenerate)then numberOfEnemysGenerated = 0; resetPlaneGrid() timer.performWithDelay(2000,generateEnemys,1) end
end
end

We first check to make sure the game isn’t over yet. We then generate a randomGridSpace, a number between 1 and 11, and a random randomEnemyNumber, a number between 1 and 3. The randomGridSpace is used to position the plane in one of eleven slots at the top of the screen on the x axis. If you think of the game area being divided into eleven sections, then we only want to place new planes in a slot that hasn’t been taken yet by another plane. The planeGrid table contains eleven 0‘s and when we place a new plane in one of the slots, we set the corresponding position in the table to 1 to indicate that slot has been taken by a plane.

We check if the index of the randomGridSpace in the table isn’t equal to 0. If it isn’t, we know that slot is currently taken and we shouldn’t continue, so we call generateEnemyPlane and return from the function.

Next, we check what randomEnemyNumber is equal to and set tempEnemy to one of the three enemy images, we also give it a property of either regular, waver, or chaser. Because Lua is a dynamic language, we can add new properties to an object at runtime. We then set whatever index is equal to randomGridSpace to 1 in the planeGrid table.

We insert tempEnemy into the enemyPlanes table for later reference and increment numberOfEnemysGenerated. If numberOfEnemysGenerated is equal to  numberOfEnemysToGenerate, we reset numberOfEnemysGenerated to 0, invoke resetPlaneGrid, and set a timer that will call generateEnemys again after two seconds. This process repeats for as long as the game isn’t over.

3. moveEnemyPlanes

As you may have guessed, the moveEnemyPlanes function is responsible for moving the enemy planes. Depending on the plane’s type, the appropriate function is called.

function moveEnemyPlanes() if(#enemyPlanes > 0) then for i=1, #enemyPlanes do if(enemyPlanes[i].type == "regular") then moveRegularPlane(enemyPlanes[i]) elseif(enemyPlanes[i].type == "waver") then moveWaverPlane(enemyPlanes[i]) else moveChaserPlane(enemyPlanes[i]) end end end
end

This function needs to be invoked in the gameLoop function.

function gameLoop() --SNIP-- checkFreeLifesOutOfBounds() checkPlayerCollidesWithFreeLife() moveEnemyPlanes()
end

4. moveRegularPlane

The moveRegularPlane simply moves the plane down the screen across the y axis.

function moveRegularPlane(plane) plane.y = plane.y+4
end

5. moveWaverPlane

The moveWaverPlane function moves the plane down the screen across the y axis and, in a wave pattern, across the x axis. This is achieved by using the cos function of Lua’s math library.

If this concept is foreign to you, Michael James Williams wrote a great introduction to Sinusoidal Motion. The same concepts apply, the only difference is that we are using cosine. You should think sine when dealing with the y axis and cosine when dealing with the x axis.

function moveWaverPlane(plane) plane.y =plane.y+4 plane.x = (display.contentWidth/2)+ 250* math.cos(numberOfTicks * 0.5 * math.pi/30)
end

In the above snippet, we use the numberOfTicks variable. We need to increment this  each time the gameLoop function is called. Add the following as the very first line in the gameLoop function.

function gameLoop() numberOfTicks = numberOfTicks + 1
end

6. moveChaserPlane

The moveChaserPlane function has the plane chasing the player. It moves down the y axis at a constant speed and it moves towards the player’s position on the x axis. Take a look at the implementation of moveChaserPlane for clarification.

function moveChaserPlane(plane) if(plane.x < player.x)then plane.x =plane.x +4 end if(plane.x > player.x)then plane.x = plane.x - 4 end plane.y = plane.y + 4
end

If you test the game now, you should see the planes moving down the screen.

7. fireEnemyBullets

Every so often, we want the enemy planes to fire a bullet. We don’t want all of them firing at the same time, however, so we choose only a couple of planes to fire.

function fireEnemyBullets() if(#enemyPlanes >= 2) then local numberOfEnemyPlanesToFire = math.floor(#enemyPlanes/2) local tempEnemyPlanes = table.copy(enemyPlanes) local function fireBullet() local randIndex = math.random(#tempEnemyPlanes) local tempBullet = display.newImage("bullet.png", (tempEnemyPlanes[randIndex].x+playerWidth/2) + bulletWidth,tempEnemyPlanes[randIndex].y+playerHeight+bulletHeight) tempBullet.rotation = 180 planeGroup:insert(tempBullet) table.insert(enemyBullets,tempBullet); table.remove(tempEnemyPlanes,randIndex) end for i = 0, numberOfEnemyPlanesToFire do fireBullet() end end
end

We first check to make sure the enemyPlanes table has more than two planes in it. If it does, we get the numberOfEnemyPlanes to fire by taking the length of the enemyPlanes table, divide it by two, and round it down. We also make a copy of the enemyPlanes table, so we can manipulate it separately.

The fireBullet function chooses a plane from the tempEnemyPlanes table and makes the plane fire a bullet. We generate a random number based on the length of the tempEnemyPlanes table, create a bullet image, and  position it  by using whichever plane is at the randIndex in the tempEnemyPlanes table. We then remove that plane from the temporary table to ensure it won’t be chosen again next time fireBullet is called.

We repeat this process however many times numerOfEnemyPlanesToFire is equal to and call the fireBullet function.

We need to start the timer that calls this function every so often. To accomplish this, add the following to the startTimers function.

function startTimers() firePlayerBulletTimer = timer.performWithDelay(2000, firePlayerBullet ,-1) generateIslandTimer = timer.performWithDelay( 5000, generateIsland ,-1) generateFreeLifeTimer = timer.performWithDelay(7000,generateFreeLife, - 1) fireEnemyBulletsTimer = timer.performWithDelay(2000,fireEnemyBullets,-1)
end

8. moveEnemyBullets

We also need to move the enemy bullets that are on-screen. This is pretty simple using the following code snippet.

function moveEnemyBullets() if(#enemyBullets > 0) then for i=1,#enemyBullets do enemyBullets[i]. y = enemyBullets[i].y + 7 end end
end

Invoke this function in the gameLoop function.

function gameLoop() --SNIP-- checkPlayerCollidesWithFreeLife() moveEnemyPlanes() moveEnemyBullets()
end

9. checkEnemyBulletsOutOfBounds

In addition to moving the enemy bullets, we need to check when the enemy bullets have gone off-screen and remove them when they do. The implementation of checkEnemyBulletsOutOfBounds should feel familiar by now.

function checkEnemyBulletsOutOfBounds() if(#enemyBullets > 0) then for i=#enemyBullets,1,-1 do if(enemyBullets[i].y > display.contentHeight) then enemyBullets[i]:removeSelf() enemyBullets[i] = nil table.remove(enemyBullets,i) end end end
end

Invoke this function in the gameLoop function.

function gameLoop() --SNIP-- moveEnemyBullets() checkEnemyBulletsOutOfBounds()
end

10. checkEnemyPlanesOutOfBounds

We should also check if the enemy planes have moved off-screen.

function checkEnemyPlanesOutOfBounds() if(#enemyPlanes> 0) then for i=#enemyPlanes,1,-1 do if(enemyPlanes[i].y > display.contentHeight) then enemyPlanes[i]:removeSelf() enemyPlanes[i] = nil table.remove(enemyPlanes,i) end end end
end

Invoke this function in the gameLoop function

function gameLoop() --SNIP-- moveEnemyBullets() checkEnemyBulletsOutOfBounds() checkEnemyPlanesOutOfBounds()
end

11. checkPlayerBulletsCollideWithEnemyPlanes

The checkPlayerBulletCollidesWithEnemyPlanes function uses the hasCollided function to check whether any of the player’s bullets has collided with any of the enemy planes.

function checkPlayerBulletsCollideWithEnemyPlanes() if(#playerBullets > 0 and #enemyPlanes > 0) then for i=#playerBullets,1,-1 do for j=#enemyPlanes,1,-1 do if(hasCollided(playerBullets[i], enemyPlanes[j])) then playerBullets[i]:removeSelf() playerBullets[i] = nil table.remove(playerBullets,i) generateExplosion(enemyPlanes[j].x,enemyPlanes[j].y) enemyPlanes[j]:removeSelf() enemyPlanes[j] = nil table.remove(enemyPlanes,j) local explosion = audio.loadStream("explosion.mp3") local backgroundMusicChannel = audio.play( explosion, fadein=1000 ) end end end end
end

This function uses two nested for loops to check whether the objects have collided. For each of the playerBullets, we run through all the planes in the enemyPlanes table and call the hasCollided function. If there’s a collision, we remove the bullet and plane, call the generateExplosion function, and load and play an explosion sound.

Invoke this function in the gameLoop function.

function gameLoop() --SNIP-- checkEnemyBulletsOutOfBounds() checkEnemyPlanesOutOfBounds() checkPlayerBulletsCollideWithEnemyPlanes()
end

12. generateExplosion

The generateExplosion function uses Corona’s SpriteObject class. Sprites allow for animated sequences of frames that reside on Image or Sprite Sheets. By grouping images into a single image, you can pull certain frames from that image and create an animation sequence.

function generateExplosion(xPosition , yPosition) local options = width = 60,height = 49,numFrames = 6 local explosionSheet = graphics.newImageSheet( "explosion.png", options ) local sequenceData = name = "explosion", start=1, count=6, time=400, loopCount=1 local explosionSprite = display.newSprite( explosionSheet, sequenceData ) explosionSprite.x = xPosition explosionSprite.y = yPosition explosionSprite:addEventListener( "sprite", explosionListener ) explosionSprite:play()
end

The newImageSheet method takes as parameters the path to the image and a table of options for the Sprite Sheet. The options we set are the width, the height, and the numFrames, how many individual images make up this sheet. There are six separate explosion images as shown in the image below.

Next, we set up a table, sequenceData, which is needed by the SpriteObject. We set the start property to 1, the count to 6, and time to 400.  The start property is the frame that the animation will start on, the count is how many frames the animation includes, and the time property is how long the animation takes to play through.

We then create the SpriteObject passing in the explosionSheet and sequenceData, set the x and y positions, and add a listener to the sprite. The listener will be used to remove the sprite once it has finished its animation.

13. explosionListener

The explosionListener function is used to remove the sprite. If the event‘s phase property is equal to ended, then we know the sprite has finished its animation and we can remove it.

function explosionListener( event ) if ( event.phase == "ended" ) then local explosion = event.target explosion:removeSelf() explosion = nil end
end

14. checkEnemyBulletsCollideWithPlayer

The checkEnemyBulletsCollideWithPlayer checks to see if any of the enemies’ bullets have collided with the player’s plane.

function checkEnemyBulletsCollideWithPlayer() if(#enemyBullets > 0) then for i=#enemyBullets,1,-1 do if(hasCollided(enemyBullets[i],player)) then enemyBullets[i]:removeSelf() enemyBullets[i] = nil table.remove(enemyBullets,i) if(playerIsInvincible == false) then killPlayer() end end end end
end

We loop through the enemyBullets table and check if any of them have collided with the player. If true, we remove that particular bullet, and, if playerIsInvincible is false, we invoke killPlayer.

Invoke this function in the gameLoop function.

function gameLoop() --SNIP-- checkEnemyPlanesOutOfBounds() checkPlayerBulletsCollideWithEnemyPlanes() checkEnemyBulletsCollideWithPlayer()
end

15. killPlayer

The killPlayer function is responsible for checking whether the game is over and spawning a new player if it isn’t.

function killPlayer() numberOfLives = numberOfLives- 1; if(numberOfLives == 0) then gameOver = true doGameOver() else spawnNewPlayer() hideLives() showLives() playerIsInvincible = true end
end

We first decrement numberOfLives by 1, and, if it’s equal to 0, we call the gameOver function. It the player has lives left, we call spawnNewPlayer, followed by hideLives, showLives, and set playerIsInvincible to true.

16. doGameOver

The doGameOver function tells the storyboard to go to the gameover scene.

function doGameOver() storyboard.gotoScene("gameover")
end

17. spawnNewPlayer

The spawnNewPlayer function is responsible for spawning a new player after it has died. The player’s plane blinks for a few seconds to show that it’s temporarily invincible.

function spawnNewPlayer() local numberOfTimesToFadePlayer = 5 local numberOfTimesPlayerHasFaded = 0 local function fadePlayer() player.alpha = 0; transition.to( player, time=200, alpha=1) numberOfTimesPlayerHasFaded = numberOfTimesPlayerHasFaded + 1 if(numberOfTimesPlayerHasFaded == numberOfTimesToFadePlayer) then playerIsInvincible = false end end timer.performWithDelay(400, fadePlayer,numberOfTimesToFadePlayer)
end

To make the player’s plane blink, we fade it in and out five times. In the fadePlayer function, we set the plane’s alpha property to 0, which makes it transparent. We then use the transition library to fade the alpha back to 1 over a period of 200 milliseconds. The to method of the transition object takes a table of options. In our example, the options table includes a time in milliseconds and the property we’d like to animate, alpha, and the desired value, 1.

We increment numberOfTimesThePlayerHasFaded and check if it’s equal to the number of times we wanted the player to fade. We then set playerIsInvincible to false. We use a timer to call the fadePlayer function however many times numberOfTimerToFadePlayer is equal to.

There is a way to do all this without using the timer and that is by using the transition‘s iterations property in combination with its onComplete handler. Read through the documentation to learn more about this alternative approach.

18. checkEnemyPlaneCollidesWithPlayer

There is one more collision check we should do and that is to see if an enemy plane collides with the player’s plane.

function checkEnemyPlaneCollideWithPlayer() if(#enemyPlanes > 0) then for i=#enemyPlanes,1,-1 do if(hasCollided(enemyPlanes[i], player)) then enemyPlanes[i]:removeSelf() enemyPlanes[i] = nil table.remove(enemyPlanes,i) if(playerIsInvincible == false) then killPlayer() end end end end
end

We loop through the enemy planes and see if any one of them collides with the player’s plane. If true, we remove that enemy plane and call killPlayer. If you think it makes the game more interesting, you could also generate an explosion here.

19. exitScene

When the game is over, we transition to the gameover scene. Remember from earlier in the tutorial, the exitScene function is where you remove any event listeners, stop timers, and stop audio that’s playing.

function scene:exitScene( event ) local group = self.view rectUp:removeEventListener( "touch", movePlane) rectDown:removeEventListener( "touch", movePlane) rectLeft:removeEventListener( "touch", movePlane) rectRight:removeEventListener( "touch", movePlane) audio.stop(planeSoundChannel) audio.dispose(planeSoundChannel) Runtime:removeEventListener("enterFrame", gameLoop) cancelTimers()
end
scene:addEventListener( "exitScene", scene )

We are basically undoing what we did in the enterScene function. We call the dispose method on the audio object to release the memory associated with the audio channel. Calling stop alone does not release the memory.

20. cancelTimers

As its name indicates, the cancelTimers function does the opposite of  startTimers, it cancels all the timers.

function cancelTimers() timer.cancel( firePlayerBulletTimer ) timer.cancel(generateIslandTimer) timer.cancel(fireEnemyBulletsTimer) timer.cancel(generateFreeLifeTimer)
end

21. Game Over Scene

It’s time to create the gameover scene. Start by adding a new Lua file to your project named gameover.lua, and add  the following code to it.

local storyboard = require( "storyboard" )
local scene = storyboard.newScene()
local gameOverText
local newGameButton return scene

22. createScene

Add the following to gameover.lua above return scene. From here on out, all code should be placed above the return scene statement.

function scene:createScene( event ) local group = self.view local background = display.newRect( 0, 0, display.contentWidth, display.contentHeight) background:setFillColor( 0,.39,.75) group:insert(background) gameOverText = display.newText( "Game Over", display.contentWidth/2,400, native.systemFont, 16 ) gameOverText:setFillColor( 1, 1, 0 ) gameOverText.anchorX = .5 gameOverText.anchorY = .5 group:insert(gameOverText) newGameButton = display.newImage("newgamebutton.png",264,670) group:insert(newGameButton) newGameButton.isVisible = false end

As we did in the previous two scenes, we give the gameover scene a blue background. We then create a TextObject instance by calling newText on display. The newText method takes a few options, the text for the object, its position, and the font to use. We give it a yellow color by invoking setFillColor, passing in RGB values as percentages. Finally, we create a button and hide it for the time being.

23. enterScene

When the storyboard has fully transitioned to the gameover scene, the enterScene method is called.

In enterScene, we remove the previous scene from the storyboard. We use the convenience method scaleTo from the Transition Library to scale the gameOverText by a factor of 4. We add an onComplete listener to the transition that calls the showButton function once the transition has completed. Lastly, we add a tap event listener to the game button that invokes the startNewGame function.

function scene:enterScene( event ) local group = self.view storyboard.removeScene("gamelevel" ) transition.scaleTo( gameOverText, xScale=4.0, yScale=4.0, time=2000,onComplete=showButton ) newGameButton:addEventListener("tap", startNewGame)
end

24. showButton

The showButton function hides the gameOverText and shows the newGameButton.

 function showButton() gameOverText.isVisible = false newGameButton.isVisible= true end

25. startNewGame

The startNewGame function tells the storyboard to transition to the gamelevel scene.

function startNewGame() storyboard.gotoScene("gamelevel")
end

26. exitScene

We need to do some cleanup when we leave the gameover scene. We remove the tap event listener we added earlier to the newGameButton.

function scene:exitScene( event ) local group = self.view newGameButton:removeEventListener("tap",startNewGame)
end

27. Add Scene Listeners

The final piece of the puzzle is adding the scene event listeners we talked about earlier. To do this, addd the following code snippet to gameover.lua.

scene:addEventListener( "createScene", scene )
scene:addEventListener( "enterScene", scene )
scene:addEventListener( "exitScene", scene )

Conclusion

We have come to the end of this series and now have a fully functional plane fighting game. I hope you’ve found these tutorials useful and have learned something along the way. Thanks for reading.

Share the joy

•  
•  
•  
•  
•  
•  
•  
•  
•  
•  
•  

Create a Plane Fighting Game in Corona: Finishing Gameplay